Drawing presses – PLC-controlled column press - 2.000 kN pressforce

Annoncer ID: M19644
Preis auf Anfrage
Send anmodning
Billeder
PLC-controlled column press - 2.000 kN pressforce - købe brugte/uploadpic/tramaofinal_inserat/bilder/19644/HP4S2001.jpg,/uploadpic/tramaofinal_inserat/bilder/19644/HP4S2002.jpg,/uploadpic/tramaofinal_inserat/bilder/19644/HP4S2003.jpg

Artikel beliggenhed

Germany

Fabrikant

OSTERBERGER

Beskrivelse

HP4S200-PLC - very high quality hydraulic PLC-controlled column press, single cylinder universal press with 2,000 kN nominal pressing force, useful table size / usable ram plate size or passage between the columns 1,250 x 1,000 mm - table height approx. 750 mm, installation height 600 mm (optional 800 mm), guided press ram due to four pieces of ground and hardened columns - therefore the ram plate can also be loaded off-center, oil cooler, decompression valve for a quick return flow of the hydraulic oil from the press cylinder into the oil tank, adjustable pressure switch, two-hand release, piston rod stroke range 0 to 500 mm. Approach speed 42 mm / sec. - pressing speed 7 mm / sec. - Return speed 70 mm / sec., Front light barriers to protect the front press room, drive power 15 kW, dimensions 1.5 x 1.3 m x H 2.7 m, weight approx. 4,500 kg.

BOSCH / REXROTH proportional valves for the regulation of the ram speed and the pressing pressure - the regulation takes place via two rotary knobs, including the possibility to set the approach speed of the press ram and the pressing speed

SIEMENS PLC - control with touch screen KTB 700 Basic, for the storage of up to fifty programs - choice between PLC operation and manual operation, press ram position measurement by encoder, pressure monitoring by measured value converter, the following can be programmed:
Distance of the press ram - dwell time of the press ram in the lower end position - decompression time - pressing pressure - number of pieces.

Die cushion with 300 kN pressing force - die cushion area 430 x 290 mm - die cushion stroke range 250 mm - four times guided - bores for receiving the drawing ram - safety valve for emptying the drawing cushion cylinder, front door with electrical monitoring, rapid traverse speed downwards 125 mm / sec. -

Status

Helt ny

Byggeår

2020

Maskintimer

0

Maskine under strøm

Ja
Send anmodning

Tilbud fra:

CNC - Maschinentechnik

CNC - Maschinentechnik
Hauptstraße 93
2384 Breitenfurt bei Wien

Kontaktperson: Wolfgang ECKER

Send anmodning
Vis telefonnummer
Tlf.: 0043 660 1327811
Vis firmaprofil



Andre interessante tilbud i denne kategori Drawing presses

universal press with 1.500 kN pressforce
Drawing presses – universal press with 1.500 kN pressforce (BJ.2020)

Preis auf Anfrage
PLC-controlled double column drawing press - 1.250 kN pressforce
Drawing presses – PLC-controlled double column drawing press - 1.250 kN pressforce (BJ.2020)

Preis auf Anfrage
CO