Brugte maskiner: Trådbehandlingsmaskiner

Søgeresultat – 33 Trådbehandlingsmaskiner fundet

Kategori: Metalbearbejdningsmaskiner -> Trådbehandlingsmaskiner
Fully Automatic Winding Machine WWM Technology Automatic SS/W
Byggeår: 2011
Status: Brugt
Fully Automatic Winding Machine WWM Technology Automatic SS/W
Annoncer ID: M104457
Germany
Two identical fully automatic winding machines are available. Both were overhauled by the manufacturer 4 years ago.
max. linear mechanical speed: 35m/s, max. compressed air pressure: 7bar.
Preis auf Anfrage
Send anmodning
Kategori: Trådbehandlingsmaskiner -> Trådskæremaskiner
Jouhsen PrecisionCut UDWO Drahtricht- und Ablängmaschine
Byggeår: 2001
Status: Brugt
Jouhsen PrecisionCut UDWO Drahtricht- und Ablängmaschine
Annoncer ID: M104329
87719 Mindelheim Germany
Technische Daten:
Draht-ø: 0,05 - 16 mm
Drähte: 1
Max. Einzugshub pro MS-Drehung: 100 mm
Teilelänge_ 5 - 6000 mm
Stk/Min: max. 2000

Ausstattung:
Preis auf Anfrage
Send anmodning
Kategori: Metalbearbejdningsmaskiner -> Trådbehandlingsmaskiner
Cutting and Stripping Machine Reger Omnistrip 9400
Byggeår: 2002
Status: Brugt
Cutting and Stripping Machine Reger Omnistrip 9400
Annoncer ID: M101812
Germany
Cable length: 45-1000mm, number of pieces: 1-999,999, stripping length: 0.1-120mm right and 0.1-45mm left, stripping length: 999.9mm on both sides, feed speed: 0.14-1.68m/s, cable cross-sections: AWG ...
Preis auf Anfrage
Send anmodning
Kategori: Metalbearbejdningsmaskiner -> Trådbehandlingsmaskiner
Punching and Bending Machine Weber
Status: Brugt
Punching and Bending Machine Weber
Annoncer ID: M101815
Germany
Clamping surface: 1700x950mm, table dimensions: 600x200mm, feed: 600mm, length: 3500mm, width: 2200mm, height: 1150mm, shafts front side: 5 each top/bottom, including 7x slides, 2x welding control DTW ...
Preis auf Anfrage
Send anmodning
Kategori: Metalbearbejdningsmaskiner -> Trådbehandlingsmaskiner
Wire Cutting Machine Schäfer CS-326
Byggeår: 2004
Status: Brugt
Wire Cutting Machine Schäfer CS-326
Annoncer ID: M101374
Germany
With documentation, without accessories, an on-site inspection is possible.

Ref.Nr.: INNO26448
Preis auf Anfrage
Send anmodning
Kategori: Metalbearbejdningsmaskiner -> Trådbehandlingsmaskiner
Automatic Frame Bending Machine EVG Graz POLYBEND LS
Byggeår: 1993
Status: Brugt
Automatic Frame Bending Machine EVG Graz POLYBEND LS
Annoncer ID: M98250
Germany
Single/ dual wire diameter: 6-16/ 6-12mm, max. bending speed: 1200°/s, connected load: 22kW, length: 4100mm, width: 1300mm, height: 1650mm, weight: 4.75t, with documentation.

Ref.Nr.: ...
Preis auf Anfrage
Send anmodning
Kategori: Metalbearbejdningsmaskiner -> Trådbehandlingsmaskiner
Double Printing Press SOMAVIS T-8K / T-8L
Byggeår: 1983
Status: Brugt
Double Printing Press SOMAVIS T-8K / T-8L
Annoncer ID: M95836
Germany
There are one Somavis T-8K and one T-8L available, max. working diameter: 6mm, max. shaft length machine 1/ 2: 80/ 100mm, output: 200-600/min.

Ref.Nr.: INNO15816
Preis auf Anfrage
Send anmodning
Kategori: Trådbehandlingsmaskiner -> Wire spools
Vertical spooler Bongard SPV
Byggeår: 1981
Status: Godt
Vertical spooler Bongard SPV
Annoncer ID: M95695
Brno Czech Republic
Catalog No. : 7154
Type: SPV
Producer: Bongard
Made in: 1981
Characteristic:
Wire diameter: 6.5 mm
Maximum coil weight: 1000 kg
Inner diameter: 520 ...
Preis auf Anfrage
Send anmodning
Kategori: Metalbearbejdningsmaskiner -> Trådbehandlingsmaskiner
Reel Bihler MH-2
Byggeår: 1989
Status: Brugt
Reel Bihler MH-2
Annoncer ID: M95173
Germany
Two Bihler reels are available, without documentation, an inspection is possible.

Ref.Nr.: INNO26067
Preis auf Anfrage
Send anmodning
Kategori: Metalbearbejdningsmaskiner -> Trådbehandlingsmaskiner
Fine Wire Multi-Drawing Machine W. Breitenbach Standard 4-III/8 (7Z)
Byggeår: 1968
Status: Brugt
Fine Wire Multi-Drawing Machine W. Breitenbach Standard 4-III/8 (7Z)
Annoncer ID: M91569
Germany
Two multiple drawing machine Breitenbach Standard 4-III/8 are available, inlet/finished diameter: 3/ 0.8-1.5mm, drawing speed: 2-8m/s, weight: 11.17t, machine 2 is in the same design as machine 1, but ...
Preis auf Anfrage
Send anmodning
Kategori: Metalbearbejdningsmaskiner -> Trådbehandlingsmaskiner
Spiralising Machine SPIRKA DW 12A
Byggeår: 1998
Status: Brugt
Spiralising Machine SPIRKA DW 12A
Annoncer ID: M89273
Germany
Number of coil carriers: 12, rotor speed: 450/min, coil volume: 550cm³, wire tension: 1-16N, pitch: 5-90mm, connected load: 5kVA, with documentation, is already dismantled.

Ref.Nr.: ...
Preis auf Anfrage
Send anmodning
Kategori: Metalbearbejdningsmaskiner -> Trådbehandlingsmaskiner
Resistance Annealing Machine Tecno Induction
Byggeår: 2016
Status: Brugt
Resistance Annealing Machine Tecno Induction
Annoncer ID: M88793
Germany
Suitable for stainless steel wire: 1.4301, 1.4310, 1.4401, wire diameter: 0.25-0.5mm with a strength up to 2400 N/mm², working speed: 75-80m/min, temperature range: 400-650°C, suitable for four ...
Preis auf Anfrage
Send anmodning
Kategori: Metalbearbejdningsmaskiner -> Trådbehandlingsmaskiner
Winding Machine Schmidt SD20-30/7
Byggeår: 1993
Status: Brugt
Winding Machine Schmidt SD20-30/7
Annoncer ID: M88639
Germany
Number of spooling positions: 2x 6, number of take-off pulley drives: 1 group drive, number of layings: 1 group laying, wire diameter: 0.15-0.3mm, bore diameter 22mm, winding speed: 20-120/min, max. ...
Preis auf Anfrage
Send anmodning
Kategori: Metalbearbejdningsmaskiner -> Trådbehandlingsmaskiner
Spring Winding Machine Emil Schenker AG FA-6S
Byggeår: 1971
Status: Brugt
Spring Winding Machine Emil Schenker AG FA-6S
Annoncer ID: M85142
Germany
With Measuring, Control and Sorting Machine Schenker MR 20 and Wire Reel SR 50.

Ref.Nr.: INNO25336
Preis auf Anfrage
Send anmodning
Kategori: Trådbehandlingsmaskiner -> Trådskæremaskiner
CO2 Laser
Status: Brugt
CO2 Laser
Annoncer ID: M84795
Czech Republic
Catalog No. : 4861
Type: LT8
Producer: ADIGE
Made in: 2011
Characteristic:
Control system: Siemens ADIGE
Total hours: 51218 h
Hours on: 34560 h
Preis auf Anfrage
Send anmodning
Kategori: Trådbehandlingsmaskiner -> Trådskæremaskiner
Wire cutting machine Fanuc A04B-0239-B032
Byggeår: 1990
Status: Brugt
Wire cutting machine Fanuc A04B-0239-B032
Annoncer ID: M81929
Brno Czech Republic
Catalog No. : 6587
Type: A04B-0239-B032
Producer: Fanuc
Made in: 1990
Characteristic:
The machine is in a good technical condition.
Preis auf Anfrage
Send anmodning
Kategori: Metalbearbejdningsmaskiner -> Trådbehandlingsmaskiner
Tension Spring Machine Wafios Maschinenfabrik FOA 2
Status: Brugt
Tension Spring Machine Wafios Maschinenfabrik FOA 2
Annoncer ID: M78856
Germany
Outer spring diameter: 5-16mm, wire thickness: 0.5-1.3mm, angle ratio: 6-18, max. throughput: 65/min, with documentation.

Ref.Nr.: INNO24694
Preis auf Anfrage
Send anmodning
Kategori: Metalbearbejdningsmaskiner -> Trådbehandlingsmaskiner
Wire Bending Machine GHISLANZONI UMBERTO PU4 SP
Byggeår: 1981
Status: Brugt
Wire Bending Machine GHISLANZONI UMBERTO PU4 SP
Annoncer ID: M77185
Germany
Including documentation.

Ref.Nr.: INNO22627
Preis auf Anfrage
Send anmodning
Kategori: Trådbehandlingsmaskiner -> Trådvikling maskiner
Wrapping machine WAFIOS SM 25
Byggeår: 1970
Status: Brugt
Wrapping machine WAFIOS SM 25
Annoncer ID: M72975
Metzingen Germany
length of reeling-pattern 0
internal dia. of stator 0
packet hight 0 mm
wire dia. 2,5 mm
working area 45 x 1650 mm
total power requirement 5 kW
weight of the ...
Preis auf Anfrage
Send anmodning
Kategori: Metalbearbejdningsmaskiner -> Trådbehandlingsmaskiner
Rewinder Rudolph & Koschinski
Status: Brugt
Rewinder Rudolph & Koschinski
Annoncer ID: M64375
Germany
The machine is a rewinding machine for producing cables, with radial force measuring axes Honigmann, including documentation.

Ref.Nr.: INNO24361
Preis auf Anfrage
Send anmodning
Kategori: Metalbearbejdningsmaskiner -> Trådbehandlingsmaskiner
Straightening and Cutting Machine Wafios R31
Byggeår: 1997
Status: Brugt
Straightening and Cutting Machine Wafios R31
Annoncer ID: M61235
Germany
Wire range: 3-6mm, speed: 60-80/min, max. coil weight: 1t.

Ref.Nr.: INNO24128
Preis auf Anfrage
Send anmodning
Kategori: Metalbearbejdningsmaskiner -> Trådbehandlingsmaskiner
Flat Cable and Tubing Cutter EUBANKS 4600
Status: Brugt
Flat Cable and Tubing Cutter EUBANKS 4600
Annoncer ID: M52271
Germany
Max. cable/ tubing diameter: 76.2/ 9,5mm, diameter: 23,200/h.

Ref.Nr.: INNO23484
Preis auf Anfrage
Send anmodning
Kategori: Trådbehandlingsmaskiner -> Trådvikling maskiner
Fine wire winding machine-unknown-
Status: Brugt
Fine wire winding machine-unknown-
Annoncer ID: M40114
64331 Weiterstadt Germany
Fine wire winding machine
Manufacturer: Aumann
Type -unknown-
380V

Keep in mind that the advertisement was translated automatically and may have errors. We are not ...
Preis auf Anfrage
Send anmodning
Kategori: Metalbearbejdningsmaskiner -> Trådbehandlingsmaskiner
Double Head Wire Bending Machine AMDA
Byggeår: 2013
Status: Brugt
Double Head Wire Bending Machine AMDA
Annoncer ID: M38874
Germany
Also suitable for processing flat steel, including documentation, without accessories, machine was scarcely used.

Ref.Nr.: INNO22234
Preis auf Anfrage
Send anmodning
Kategori: Metalbearbejdningsmaskiner -> Trådbehandlingsmaskiner
Cable Center METZNER Triathlon 3000
Byggeår: 2006
Status: Brugt
Cable Center METZNER Triathlon 3000
Annoncer ID: M38740
Germany
Max. outer cable diameter: 4mm, strand and cable length: 250-999mm, length: 1750mm, width: 1100mm, height: 1520mm, weight: 250kg.

Ref.Nr.: INNO22197
Preis auf Anfrage
Send anmodning
Kategori: Metalbearbejdningsmaskiner -> Trådbehandlingsmaskiner
Rewinding Machine ROSENDAHL RA 7061
Byggeår: 1987
Status: Brugt
Rewinding Machine ROSENDAHL RA 7061
Annoncer ID: M29594
Germany
Max. coil weight: 10t, controls: SIEMENS S5, without documentation.

Ref.Nr.: INNO21279
Preis auf Anfrage
Send anmodning
Kategori: Metalbearbejdningsmaskiner -> Trådbehandlingsmaskiner
Wire Drawing Machine LUKAS DCI 11/ 50-360
Byggeår: 2002
Status: Brugt
Wire Drawing Machine LUKAS DCI 11/ 50-360
Annoncer ID: M28399
Germany
Max. speed: 360m/min, power: 5.6kW.

Ref.Nr.: INNO21074
Preis auf Anfrage
Send anmodning
Kategori: Trådbehandlingsmaskiner -> Trådbøjningsmaskiner / Trådbehandlingsmaskiner -> Trådskæremaskiner / Trådbehandlingsmaskiner -> Trådvikling maskiner
Progress RTR 14-1 BK
Byggeår: 1990
Status: Brugt
Progress RTR 14-1 BK
Annoncer ID: M13972
Germany
Wire straightener and cutting Maschine with a with run-out-table (10m)
with beanding head
and a pick-up-loader (automatically moveable)
System: roller straightener
Preis auf Anfrage
Send anmodning
Kategori: Metalbearbejdningsmaskiner -> Trådbehandlingsmaskiner
Hammer Mill TIETJEN V3
Status: Brugt
Hammer Mill TIETJEN V3
Annoncer ID: M11283
Germany
Includes the following machines of a mill (1) Molassing Machine (2) Bag Beating Machine BAUMGARTEN (3) Inclination Scale SECA, max. load: 150kg (4) 2x Filler KIEKIENS CYCLOON (5) Hammer Mill TIETJEN ...
Preis auf Anfrage
Send anmodning
Kategori: Metalbearbejdningsmaskiner -> Trådbehandlingsmaskiner
Leg Spring Winding Machine SCHENKER FA-10T
Byggeår: 1999
Status: Brugt
Leg Spring Winding Machine SCHENKER FA-10T
Annoncer ID: M12168
Germany
There are three identical SCHENKER FA-10T available, wire diameter: 0.2-1mm, max. spring diameter: 10mm, leg length: 50mm, windings: 0-70, capacity: 8-83 pieces/min, year of construction: 1974, 1975, ...
Preis auf Anfrage
Send anmodning
Kategori: Metalbearbejdningsmaskiner -> Trådbehandlingsmaskiner
Double Blow Headers CHUN-ZU COH-10 L
Byggeår: 1997
Status: Brugt
Double Blow Headers CHUN-ZU COH-10 L
Annoncer ID: M11953
Germany
Max. diameter: 12mm, shaft length: 440mm, wire section: 465mm, output: 30-40 pieces/min.

Ref.Nr.: INNO15814
Preis auf Anfrage
Send anmodning
Kategori: Metalbearbejdningsmaskiner -> Trådbehandlingsmaskiner
Leg Spring Coiling Machine Wafios FTU 2
Byggeår: 1983
Status: Brugt
Leg Spring Coiling Machine Wafios FTU 2
Annoncer ID: M12239
Germany
There are two WAFIOS FTU 2 available, wire diameter: 0.5-2mm, leg length: 80x120mm, coiling mandrel diameter: 20mm, coiling spindle path: 90mm, output: 70 springs/min.

Ref.Nr.: INNO12734
Preis auf Anfrage
Send anmodning
Kategori: Metalbearbejdningsmaskiner -> Trådbehandlingsmaskiner
Automatic Extended Loop Tension Spring Bending and Winding Machine Wafios ZOS 3
Byggeår: 2001
Status: Brugt
Automatic Extended Loop Tension Spring Bending and Winding Machine Wafios ZOS 3
Annoncer ID: M12240
Germany
Wire diameter: 1-3.2mm, spring diameter: 9-28mm, spring length: 25-150mm, capactiy: 8-25springs/min, with winder Wafios FUD 41, eyeletting machine Wafios FOS 3.

Ref.Nr.: INNO12735
Preis auf Anfrage
Send anmodning
tramao-Logo

Sælg brugte Trådbehandlingsmaskiner

Detaljer!
Sell your metal processing machines, machine tools, printing machines, construction machines, wood processing machines on tramaoSælg dine metalforarbejdningsmaskiner, værktøjsmaskiner, trykmaskiner, byggemaskiner, træbearbejdningsmaskiner på tramao.com.
CO