Brugte maskiner: Bearbejdningscenter lodret - Søgeresultat - 324 Bearbejdningscenter lodret fundet

Transport dimensions:
Machine: Length x Width x Height: 4000 x 3000 x 3270 mm
Accessories: Chip conveyor, coolant system and other accessories on pallets.

Changes and errors ...

This Elumatec SBZ 140 vertical machining center was built in Germany in the year 2004. This machine can operate with a spindle speed up to 21000 rpm.
Main drive
Spindle speed range: ...

This MIKRON Mill E 700 U Vertical Machining Center was built in 2019. This 5 axis machine operates through a HEIDENHAIN iTNC 530 control unit. It works with a spindle speed up to 20000 rpm. This ...

Details:
x travel: 700 mm
y travel: 400 mm
z travel: 300 mm
- number of processing axes (excl parallel axes): 3
- X-axis travel: 700 mm
- Y-axis ...

Details:
x travel: 700 mm
y travel: 400 mm
z travel: 300 mm
- number of processing axes (excl parallel axes): 3
- X-axis travel: 700 mm
- Y-axis ...

Details:
x travel: 850 mm
y travel: 630 mm
z travel: 500 mm
- number of processing axes (excl parallel axes): 4
- X-axis travel: 850 mm
- Y-axis ...

This Hyundai Wia VX500 Vertical Machining Center was built in 2008. This 3 axis machine had 4 axis in the past that's why the Fanuc AMP (A axis) is included so it can work with 4 axis if an NC rotary ...

This CHIRON FZ 12 S Vertical Machining Center was built in Germany in 1995. It is equipped with a SIEMENS SINUMERIK 810M control unit. This 3 axis machine works with a spindle speed up to 10500 rpm. ...

Details:
x travel: 450 mm
y travel: 320 mm
z travel: 305 mm
- number of processing axes (excl parallel axes): 5
- .. among of them simultaneous CNC axes: ...

Details:
x travel: 520 mm
y travel: 300 mm
z travel: 360 mm
- number of processing axes (excl parallel axes): 4
- .. among of them simultaneous CNC axes: ...

This Doosan VC630/5AX vertical machining center was manufactured in Korea in 2011. This 5 axis machine is operated through a HEIDENHAIN iTNC530 control unit. It has a spindle speed up to 20000 rpm and ...

Details:
x-travel: 700 mm
y-travel: 420 mm
z-travel: 380 mm
control: Siemens 840 D SL
distance spindle /table: 200 - 580 mm
Number of revolutions: 20 ...

This KIHEUNG Combi-U7 Vertical Machine Center was manufactured in South Korea in the year 2016. It has only 3781 of working hours, of which 988 are spindle hours. This 3 axis machine operates through ...

This HAAS VF-4SS vertical machining center was built in the year 2010 in the United States. It has a record of 8349 spindle hours. This 3 axis machine is operated through a control unit of the same ...

This MORI SEIKI SV-500 Vertical Machining Center was built in 2001. This 3 axis machine has a working record of 8502 hours. It is operated through a MORI SEIKI MSC-501 control unit. It can work with ...

MAZAK vertical machining center VTC 300 C II
Control: Mazatrol 640M, Year of manufacture: 2008

Technical specification:

Travel X – Y – Z axis mm 1740 / ...

This Doosan VM 960L Vertical Machining Center was built in the year 2014. It counts with 4762 hours, from which 1286 are cutting hours and 569 are running hours. It is operated through a FANUC Series ...

This TOS TRENCÍN MC 100 V vertical machining center was manufactured in 1996 in Slovakia. This machine is operated through a Heidenhain TNC 415 control unit. It has a spindle speed range 5 - 8000 ...

This HAAS VF-6 vertical machining machine was built in 2009 in the United States. This 3 axis machine is operated through a control unit of the same brand. This machine has a spindle speed up to 7500 ...

This Hurco VM10i Vertical Machining Center was built in Taiwan in the year 2018. It has been operative for only 170 hours. This 3 axis machine performs through a MAX5 control unit equipped with a 2 x ...

This HAAS VF-4SS vertical machining center was built in the year 2014 in the United States. This 3 axis machine is operated through a control unit of the same brand. It has a spindle speed up to 12000 ...

This AWEA BM1400 Vertical Machining Center was manufactured in the year 2010. This 3 axis machine has 26864 spindle hours. The machine operates through a FANUC Series Oi-MD control unit. It has a ...

This Matsuura MX-520 Vertical Machining Center was built in the year 2017. It has a production history of only 4525 working hours. This 5 axis machine is equipped with a Matsuura G-Tech 31i control ...

This MORI SEIKI VS 60 vertical machine center was built in the year 2005. This 4 axis machine is capable of working with the main spindle speed up to 4500 rpm. It presents good working conditions.

This MICROCUT V-20G Vertical Machining Center was built in the year 2014 in Taiwan. It is equipped with a Heidenhain 530 control unit. It has 10040 spindle hours. This machine incorporates a spindle ...

This DMG MORI DMC 1035V Ecoline vertical machine center was made in the year 2012 in Poland. It has been on for 17590 hours, of which 7410 hours are spindle time. It is equipped with a SIEMENS 840D ...

This STAMA MC536/Twin vertical machining machine was built in 2007. This 3 axis machine is operated through a SIEMENS SINUMERIK control unit. This machine has a spindle speed range 0-10000 rpm.

Details:
x travel: 600 mm
y travel: 450 mm
z travel: 450 mm
- number of processing axes (excl parallel axes): 3
- X-axis travel: 600 mm
- Y-axis ...

This Johnford SV-48H Vertical Machining Center was built in the year 2008 in Taiwan. It operates through a HEIDENHAIN 530 control unit. This 3 axis machine can work with a spindle speed up to 6000 ...

This Wele AA2090 Vertical Machining Center was produced in Taiwan in the year 2012. It is equipped with a Heidenhain iTNC 530 control unit. This 3 axis machine can work with a spindle speed range up ...

This Hyundai Wia KF 6700B/50 vertical machine center was built in the year 2020. It has been on for only 946 hours, of which 301 are cutting time. This 3 axis machine runs through a Fanuc i Series ...

This DECKEL MAHO DMU 70 eVolution Vertical Machine Center was manufactured in the year 2001. it has been working for 12500 hours. The machine operates through a Siemens 840 control unit. This 5 axis ...

This DMG MORI DMU 75 monoBLOCK Vertical Machining Center was manufactured in the year 2018 in Germany. It has a record of 5050 hours, of which 2080 are spindle hours. This 5 axis machine operates ...

This DMG Deckel Maho Ecomill 70 vertical machine center was manufactured in the year 2016. It has been on for 5728 hours, of which 2242 are spindle hours. It is controlled with a CNC Siemens ...

This Brother TC-S2C-0 Vertical Machining Center was manufactured in the year 2007. It is equipped with a brother CNC B00 control unit. This 4 axis machine incorporates 21 slots in storage and can work ...

ARBEITSWEGE ANZ.ACHSEN








: 1626x1016x 762

Baujahr: 2006

This FEHLMANN PICOMAX 82 CNC Vertical Machining Center was built in the year 1997 in Switzerland. It has a record of 41785 hours, of which approximately 19005 are spindle hours. This 3 axis machine is ...

This POS POSmill C1050 Vertical Machining Center was built in the year 2012. It has a total of 6709 spindle running hours. This 3 axis machine is operated through a Heidenhein control unit. It ...

This Doosan MYNX 7500/50 vertical machining center was built in 2012 in Korea. This 3 axis machine is equipped with a FANUC Series 32i - MODEL A control unit. It has a spindle speed up to 12000 rpm. ...

This Johnford VMC 650A Vertical Machining Center was built in the year 1998. It has a production history of approximately 38000 working hours. This 3 axis machine is operated through a FANUC Series ...

This Makino PS95 vertical machining center was manufactured in 2014. The machine has a total of 4000 hours. It is operated through a control unit of the same brand. This 4 axis machine has a spindle ...

Details:
x travel: 800 mm
y travel: 560 mm
z travel: 510 mm
- basic design: bed type:
- number of processing axes (excl parallel axes): 3
- X-axis ...

Details:
x travel: 400 mm
y travel: 400 mm
z travel: 425 mm
- X-axis travel: 400 mm
- Y-axis travel: 400 mm
- Z-axis travel: 425 mm
- distance ...

Details:
x travel: 400 mm
y travel: 450 mm
z travel: 350 mm
- number of processing axes (excl parallel axes): 3
- .. among of them simultaneous CNC axes: ...

Details:
x travel: 630 mm
y travel: 500 mm
z travel: 500 mm
- number of processing axes (excl parallel axes): 3
- X-axis travel: 630 mm
- Y-axis ...

Details:
x travel: 1080 mm
y travel: 710 mm
z travel: 710 mm
- number of processing axes (excl parallel axes): 4
- .. among of them simultaneous CNC axes: ...

Details:
x travel: 700 mm
y travel: 550 mm
z travel: 450 mm
- number of processing axes (excl parallel axes): 3
- X-axis travel: 700 mm
- Y-axis ...

Details:
x travel: 500 mm
y travel: 400 mm
z travel: 400 mm
- X-axis travel: 500 mm
- Y-axis travel: 400 mm
- Z-axis travel: 400 mm
- table ...

Details:
x travel: 300 mm
y travel: 400 mm
z travel: 425 mm
- number of spindles: 2
- number of processing axes (excl parallel axes): 3
- X-axis ...

Details:
x-travel: 760 mm
y-travel: 440 mm
z-travel: 460 mm
Control: Sinumerik 828D Siemens
turning speed range - main spindle: 12 - 12.000 min/-1